Difference between revisions of "Camera Maintenance"
Martin Cupak (talk | contribs) m (→Servicing and deployment checklists) |
Martin Cupak (talk | contribs) m (add link to replace HDDs) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 4: | Line 4: | ||
* [[Media:Checklist_Web_GUI.pdf|GUI commands checklist]] (Web GUI, missing some steps not implemented in the GUI) | * [[Media:Checklist_Web_GUI.pdf|GUI commands checklist]] (Web GUI, missing some steps not implemented in the GUI) | ||
* [[Media:Checklist HDDs replace.pdf|Camera system servicing checklist]] | * [[Media:Checklist HDDs replace.pdf|Camera system servicing checklist]] | ||
| + | === Checklist for refurbish, repair, upgrade before shipping or before heading on a trip === | ||
| + | * [[Media:Checklist_in_lab_refurbish_shipping_trip.pdf|Checklist for configuration and testing in lab]] (requires some knowledge of the camera system) | ||
=== General User Interface via the web === | === General User Interface via the web === | ||
| Line 10: | Line 12: | ||
* [[Using the GUI for Regular Maintenance#Check hard drive storage space|Check hard drive storage space]] | * [[Using the GUI for Regular Maintenance#Check hard drive storage space|Check hard drive storage space]] | ||
* [[Using the GUI for Regular Maintenance#Check GPS status|Check GPS status]] | * [[Using the GUI for Regular Maintenance#Check GPS status|Check GPS status]] | ||
| − | * [[ | + | * [[Manual_Maintenance#3._Format_the_new_drives_after_replacing|Format HDDs]] |
* [[Using the GUI for Regular Maintenance#Run interval control test|Run testing software]] | * [[Using the GUI for Regular Maintenance#Run interval control test|Run testing software]] | ||
| Line 27: | Line 29: | ||
* [[Formatting the CF Card|Format the CF Card]] | * [[Formatting the CF Card|Format the CF Card]] | ||
* [[Manual_Maintenance#Replacing_embedded_PC_board|Replacing the embedded PC]] | * [[Manual_Maintenance#Replacing_embedded_PC_board|Replacing the embedded PC]] | ||
| + | * [[Replacing hard drives]], incl what models are recommended | ||
This is recommended [[Camera_Maintenance_Toolkit|minimal toolkit]]. This is a [[Camera_servicing_kit|comprehensive servicing]] kit we use on field trips in Australia. | This is recommended [[Camera_Maintenance_Toolkit|minimal toolkit]]. This is a [[Camera_servicing_kit|comprehensive servicing]] kit we use on field trips in Australia. | ||
| Line 48: | Line 51: | ||
* [[DFNSMALL observatories BIOS configuration]] - including jumpers - for Commell LE-37D PC | * [[DFNSMALL observatories BIOS configuration]] - including jumpers - for Commell LE-37D PC | ||
| + | * [[DFNSMALL observatories BIOS configuration - Advantech]] - including BIOS update - for Advantech MIO 5250 PC | ||
==== DFNSKITs ==== | ==== DFNSKITs ==== | ||
Latest revision as of 10:38, 17 January 2024
Contents
Servicing and deployment checklists
Printable PDF checklists with steps what to do on a remote site.
- Camera system replace / deploy checklist (commandline/text terminal instructions)
- GUI commands checklist (Web GUI, missing some steps not implemented in the GUI)
- Camera system servicing checklist
Checklist for refurbish, repair, upgrade before shipping or before heading on a trip
- Checklist for configuration and testing in lab (requires some knowledge of the camera system)
General User Interface via the web
When servicing cameras, the GUI is your first port of call. It can be used to
For full instructions on it's use, see Using the GUI for Regular Maintenance.
Physical HW maintenance
You will also occasionally be required to:
- Installing lens and DSLR in the DFNEXT observatory type
- Fitting the outer blower ducting on a DFNEXT or DFNSMALL observatory
- Physically replace the hard drives
- Clean the Lenses and Applying Hydrophobic Lens Coating
- Nikon DSLR settings
- Focusing the DSLR
- Focusing the video lens
- Format the CF Card
- Replacing the embedded PC
- Replacing hard drives, incl what models are recommended
This is recommended minimal toolkit. This is a comprehensive servicing kit we use on field trips in Australia.
Manual Maintenance using commandline (Todo: move this link and recategorise content within)
If you are ever required to perform any manual maintenance, use the following links for information on the following topics, or see the general Manual Maintenance page.
- Replace the Hard Drives
- Update Software, Update Software Page 2 Todo: fix duplication here
- Connecting to the PC with a keyboard and monitor
- Finding network interface MAC address
- Configure the local time zone
Advanced Usage
DFNSMALLs
- DFNSMALL observatories BIOS configuration - including jumpers - for Commell LE-37D PC
- DFNSMALL observatories BIOS configuration - Advantech - including BIOS update - for Advantech MIO 5250 PC
DFNSKITs
- DFNKIT embedded PC BIOS configuration - including jumpers - for Commell LE-37D PC
DFNEXTs
- DFNEXT onservatories BIOS configuration - including jumpers - for Commell LE-37G PC
FireOPALs
- FireOPAL observatories specific configurations (6-core Mini ITX PC BIOS)
