Latest revision as of 01:22, 4 December 2020

Instructions for instruments operated during the Hayabusa-2 observation campaign.

Infrasound

@@ Line 13: / Line 13: @@
 * [[RS&BOOM|Raspberry Shake]]
-= Optical (imaging) =
+= Optical =
 * [[DFNEXT_temporary_station|DFNEXT temporary station]]
-= Optical (spectroscopy) =
+* [[DFNEXT PC and video only|DFNEXT002 Marla]]
+* [[camera_tripod|Camera on tripod]]
 = EM =
@@ Line 25: / Line 26: @@
 = Other =
 * [[Absolute barometer|Absolute barometer]]
-* EPD
-The Energetic particle detector simply requires USB power. plug it in, and green LED lights should show on the detector at the top. The datalogger is a raspberry pi, so don't keep plugging/unplugging it, or the disk will get damaged. Just plug it in once, give it time to boot, and good to go.
-for deployment:
-- 2 systems, to be deployed at the same sites as the EM antennae
-- The sensor is in a plastic box, it needs a sunshield of some sort. Try not to block the upward view of the sensor with anything that would block energetic particles (so no metal, or rock - lighter stuff is ok!). Maybe just use a large sunshield and weigh it down around the edges. N-S orientation doesn't matter.
-- Please GPS the location (Handheld unit plus photo showing gps coords and sensor system number is fine).
-Post event:
-After the event, data will be on the card in /home/pi/epd_log.txt. please back this file up!
+* [[EPD|Energetic Particle Detector]]