Revision as of 08:34, 3 November 2020

Power

Location of the instrument is NOT logged by the instrument itself. Do at least handheld GPS unit logging. AND if possible RTK relative positioning between the instruments at the same site.

Plug in instrument box via 2.1 mm 12V jack to cigarette lighter plug.

Inside the box, screen will display its status:

When you leave the screen should be on "logging".

Simply unplug the power as there is no power down button (there is a small risk of SD card corruption).

@@ Line 1: / Line 1: @@
+= Power =
+Powered using 12V 100Ah+ [[temporary battery with sunshield|temporary battery with sunshield]].
+= Localisation =
+Location of the instrument is NOT logged by the instrument itself.
+Do at least [[handheld GPS position logging|handheld GPS unit logging]].
+AND if possible [[RTK|RTK relative positioning]] between the instruments at the same site.
+= Set up =
+* Remove transport padding from inside the box.
+* Visually check cable connexions
+* Feed 2.1 mm jack to inside the box.
+* Place box under sunshield (South of the battery)
+= Plug in / Turn on =
+Plug in instrument box via 2.1 mm 12V jack to cigarette lighter plug.
+Inside the box, screen will display its status:
+* "GPS OK"
+* "starting logging"
+* "logging"
+When you leave the screen should be on "logging".
-Powered using 12V 100Ah+ [[temporary battery with sunshield|temporary battery with sunshield]].
+= Turn off =
+Simply unplug the power as there is no power down button (there is a small risk of SD card corruption).