Difference between revisions of "Camera Maintenance"
Martin Cupak (talk | contribs) m (→DFNEXT observatories) |
Martin Cupak (talk | contribs) (→FireOPAL observatories) |
||
| Line 34: | Line 34: | ||
* [[DFNEXT onservatories BIOS configuration]] - including jumpers - for Commell LE-37G PC | * [[DFNEXT onservatories BIOS configuration]] - including jumpers - for Commell LE-37G PC | ||
| − | ==== | + | ==== FireOPALs ==== |
* [[FireOPAL observatories specific configurations]] (ASUS PC BIOS) | * [[FireOPAL observatories specific configurations]] (ASUS PC BIOS) | ||
Revision as of 17:29, 28 August 2018
Contents
General User Interface via the web
When servicing cameras, the GUI is your first port of call. It can be used to
For full instructions on it's use, see Using the GUI for Regular Maintenance.
Physical HW maintenance
You will also occasionally be required to:
- Installing lens and DSLR in the DFNEXT observatory type
- Physically replace the hard drives
- Clean the Lenses
- Applying Hydrophobic Lens Coating
Manual Maintenance using commandline (Todo: move this link and recategorise content within)
If you are ever required to perform any manual maintenance, use the following links for information on the following topics, or see the general Manual Maintenance page.
- Replace the Hard Drives
- Format the CF Card
- Update Software, Update Software Page 2 Todo: fix duplication here
- Connecting to the PC with a keyboard and monitor
- Focusing the DSLR
Advanced Usage
DFNEXTs
- DFNEXT onservatories BIOS configuration - including jumpers - for Commell LE-37G PC
FireOPALs
- FireOPAL observatories specific configurations (ASUS PC BIOS)
