Difference between revisions of "FireOPAL observatories specific configurations"

From DFN Wiki
Jump to: navigation, search
m (BIOS settings - Supermicro PC)
(Replaced content with "moved to private wiki")
(Tag: visualeditor)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
= BIOS settings - Supermicro PC =
+
moved to private wiki
 
 
Supermicro board with 6-core 12-thread i7-8700 CPU
 
 
 
Advanced -> Boot Feature -> AC Loss Policy -> Power On<br>
 
Advanced -> ACPI -> ACPI Sleep state -> Suspend disabled<br>
 
''Note: SATA hotplug is enabled by default''
 
 
 
= BIOS settings - Asus PC =
 
This is applicable for the mini-ITX 6core 12-thread i7 CPU based PCs.
 
 
 
* '''Enable XMP Profile 1'''
 
 
 
* '''SATA Hot Plug'''
 
<p>Press F7 for advanced mode<br>
 
Go across to the Advanced Tab<br>
 
Scroll down to PCH Storage Configuration<br>
 
Press Enter<br>
 
Enable SATA Hot Plug for SATA 1,2,3&4.<br>
 
Press Esc</p>
 
 
 
* '''Disable fancy RGB LEDs'''
 
<p>Scroll down to Onboard Devices Configuration, press Enter<br>
 
Disable RGB LED lighting in work state<br>
 
Disable RGB LED lighting in sleep states</p>
 
 
 
* '''Disable Wi-Fi Controller'''
 
 
 
* '''Disable Bluetooth Controller'''
 
<p>Press Esc</p>
 
 
 
* '''Power settings'''
 
<p>Scroll Down to APM Configuration, press Enter<br>
 
Change Restore AC Power Loss to Power On<br>
 
Scroll Down to Power On By RTC and Enable<br>
 
Set Days to 0 and Hour to 8<br>
 
Go Across to Monitor Tab</p>
 
 
 
* '''Fan settings'''
 
<p>Scroll Down to Q-Fan Configuration, press Enter<br>
 
Scroll Down to AIO Pump Control and select PWM Control<br>
 
Connect Enclosure Fans (2x Noctua NF-A9 PWM)<br>
 
Scroll up to Qfan Tuning<br>
 
Press enter to tune fan control and wait for it to complete</p>
 
 
 
* '''Boot device settings'''
 
<p>Go across Boot tab<br>
 
Ensure that Boot Option #1 is the Samsung 960 EVO 250GB</p>
 
 
 
* '''Boot Configuration'''
 
<p>Select boot configuration option:<br>
 
Set ''Wait for F1 on Error'' to disabled<br>
 
</p>
 
 
 
* '''Save settings and exit'''
 
<p>Press F10 and Enter to Save UEFI BIOS settings and reboot</p>
 

Latest revision as of 11:12, 8 April 2019

moved to private wiki