Difference between revisions of "Camera Maintenance Toolkit"
Martin Cupak (talk | contribs) m (→Installation Toolkit: added silicone) |
Martin Cupak (talk | contribs) m (added Ethernet cable) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 20: | Line 20: | ||
Molex pin removal tool | Molex pin removal tool | ||
| − | Camera | + | Camera enclosure key |
| + | |||
| + | Ethernet cable for local connection with laptop | ||
=== Additional Tools that may be useful === | === Additional Tools that may be useful === | ||
<nowiki>#</nowiki>0 Phillips if you need to replace or install modem | <nowiki>#</nowiki>0 Phillips if you need to replace or install modem | ||
| − | 13mm socket with extension for removing base plate if required | + | 13mm socket with extension for removing base plate from inside the camera enclosure if required |
=== Installation Toolkit === | === Installation Toolkit === | ||
Latest revision as of 16:57, 6 September 2019
Contents
DFNext Maintenance Toolkit
Basic Toolkit
7mm spanner
7mm socket for installing lens (you can do it with the spanner, but it's a pain)
8mm spanner
13mm spanner
Adjustable spanner
#1 Phillips driver
#2 Phillips driver
1.4-2.4mm flat head screw driver for PC power terminals
Molex pin removal tool
Camera enclosure key
Ethernet cable for local connection with laptop
Additional Tools that may be useful
#0 Phillips if you need to replace or install modem
13mm socket with extension for removing base plate from inside the camera enclosure if required
Installation Toolkit
Long nosed pliers
Side cutters
UV resistant cable ties
UV resistant silicone to glue the outer blower ducting
Power Cable Assembly Toolkit
Soldering iron
Wire strippers
Sharp utility knife with extendable blade (snap-off type recommended)
