FireOPAL observatories specific configurations

From DFN Wiki
Revision as of 17:54, 23 August 2018 by Robert Howie (talk | contribs) (1 revision imported)
Jump to: navigation, search

BIOS settings

This is applicable for the mini-ITX 6core 12-thread i7 CPU based PCs.

  • Enable XMP Profile 1
  • SATA Hot Plug

Press F7 for advanced mode
Go across to the Advanced Tab
Scroll down to PCH Storage Configuration
Press Enter
Enable SATA Hot Plug for SATA 1,2,3&4.
Press Esc

  • Disable fancy RGB LEDs

Scroll down to Onboard Devices Configuration, press Enter
Disable RGB LED lighting in work state
Disable RGB LED lighting in sleep states

  • Disable Wi-Fi Controller
  • Disable Bluetooth Controller

Press Esc

  • Power settings

Scroll Down to APM Configuration, press Enter
Change Restore AC Power Loss to Power On
Scroll Down to Power On By RTC and Enable
Set Days to 0 and Hour to 8
Go Across to Monitor Tab

  • Fan settings

Scroll Down to Q-Fan Configuration, press Enter
Scroll Down to AIO Pump Control and select PWM Control
Connect Enclosure Fans (2x Noctua NF-A9 PWM)
Scroll up to Qfan Tuning
Press enter to tune fan control and wait for it to complete

  • Boot device settings

Go across Boot tab
Ensure that Boot Option #1 is the Samsung 960 EVO 250GB

  • Boot Configuration

Select boot configuration option:
Set Wait for F1 on Error to disabled

  • Save settings and exit

Press F10 and Enter to Save UEFI BIOS settings and reboot

Retrieved from ‘https://wiki.dfn.net.au/index.php?title=FireOPAL_observatories_specific_configurations&oldid=41’