Difference between revisions of "Blackbox infrasound logger"
(Created page with "These are designed to go where there is internet access. They have to be co-located with a DFNEXT observatory, as the DFNEXT can easily provide Wi-Fi with internet patch-throu...") |
(→Turn on) |
||
| Line 8: | Line 8: | ||
* portable screen | * portable screen | ||
| − | = Turn on = | + | = Turn on for config = |
| − | Do not plug in the hub at boot time. | + | * Do not plug in the USB hub at boot time. |
| − | + | * if HDMI screen plugged in, system goes straight into X mode. | |
| − | + | * no password required | |
| + | * plug in USB hub with keyboard, mouse. | ||
= WiFi confiduration = | = WiFi confiduration = | ||
Revision as of 11:44, 4 November 2020
These are designed to go where there is internet access. They have to be co-located with a DFNEXT observatory, as the DFNEXT can easily provide Wi-Fi with internet patch-through.
Tools:
- USB hub
- keyboard
- HDMI cable
- portable screen
Turn on for config
- Do not plug in the USB hub at boot time.
- if HDMI screen plugged in, system goes straight into X mode.
- no password required
- plug in USB hub with keyboard, mouse.
WiFi confiduration
to configure Wi-Fi once the RPi is booted:
- Open a terminal
- "sudo raspi-config"
- select "Network Options"
- select WiFi
- SSID: "DFNEXTXXX" XXX= DFNEXT system number (written on the box)
- password: not provided here.
- save
- "ping www.google.com" to confirm
