Difference between revisions of "Blackbox infrasound logger"
| Line 2: | Line 2: | ||
They have to be co-located with a DFNEXT observatory, as the DFNEXT can easily provide Wi-Fi with internet patch-through. | They have to be co-located with a DFNEXT observatory, as the DFNEXT can easily provide Wi-Fi with internet patch-through. | ||
| − | + | ||
| + | |||
| + | = Turn on for config = | ||
| + | Things required: | ||
* USB hub | * USB hub | ||
* keyboard | * keyboard | ||
| + | * (mouse) | ||
* HDMI cable | * HDMI cable | ||
* portable screen | * portable screen | ||
| − | + | Sequence: | |
* Do not plug in the USB hub at boot time. | * Do not plug in the USB hub at boot time. | ||
* plug in HDMI cable, system goes straight into X mode. | * plug in HDMI cable, system goes straight into X mode. | ||
Latest revision as of 11:50, 4 November 2020
These are designed to go where there is internet access. They have to be co-located with a DFNEXT observatory, as the DFNEXT can easily provide Wi-Fi with internet patch-through.
Turn on for config
Things required:
- USB hub
- keyboard
- (mouse)
- HDMI cable
- portable screen
Sequence:
- Do not plug in the USB hub at boot time.
- plug in HDMI cable, system goes straight into X mode.
- plug in USB-C power cable
- no password required
- once booted: plug in USB hub with keyboard, mouse.
Turn on for operation
Plug in:
- GPS antenna
- WiFi antenna
- sensor (via RS232)
- last: power via USB-C cable
If configured properly, the system will auto connect to the designated WiFi, and it can be accessed remotely.
Turn off
- Simply unplug power (a safe shutdown is performed automatically by the box when it looses power)
WiFi confiduration
to configure Wi-Fi once the RPi is booted:
- Open a terminal
- "sudo raspi-config"
- select "Network Options"
- select WiFi
- SSID: "DFNEXTXXX" XXX= DFNEXT system number (written on the box)
- password: not provided here.
- save
- "ping www.google.com" to confirm
