|
|
| (One intermediate revision by one other user not shown) |
| Line 1: |
Line 1: |
| − | = BIOS settings - Supermicro PC =
| + | moved to private wiki |
| − | | |
| − | Supermicro board with 6-core 12-thread i7-8700 CPU
| |
| − | | |
| − | Advanced -> Boot Feature -> AC Loss Policy -> Power On<br>
| |
| − | Advanced -> ACPI -> ACPI Sleep state -> Suspend disabled<br>
| |
| − | ''Note: SATA hotplug is enabled by default''
| |
| − | | |
| − | = BIOS settings - Asus PC =
| |
| − | This is applicable for the mini-ITX 6core 12-thread i7 CPU based PCs.
| |
| − | | |
| − | * '''Enable XMP Profile 1'''
| |
| − | | |
| − | * '''SATA Hot Plug'''
| |
| − | <p>Press F7 for advanced mode<br>
| |
| − | Go across to the Advanced Tab<br>
| |
| − | Scroll down to PCH Storage Configuration<br>
| |
| − | Press Enter<br>
| |
| − | Enable SATA Hot Plug for SATA 1,2,3&4.<br>
| |
| − | Press Esc</p>
| |
| − | | |
| − | * '''Disable fancy RGB LEDs'''
| |
| − | <p>Scroll down to Onboard Devices Configuration, press Enter<br>
| |
| − | Disable RGB LED lighting in work state<br>
| |
| − | Disable RGB LED lighting in sleep states</p>
| |
| − | | |
| − | * '''Disable Wi-Fi Controller'''
| |
| − | | |
| − | * '''Disable Bluetooth Controller'''
| |
| − | <p>Press Esc</p>
| |
| − | | |
| − | * '''Power settings'''
| |
| − | <p>Scroll Down to APM Configuration, press Enter<br>
| |
| − | Change Restore AC Power Loss to Power On<br>
| |
| − | Scroll Down to Power On By RTC and Enable<br>
| |
| − | Set Days to 0 and Hour to 8<br>
| |
| − | Go Across to Monitor Tab</p>
| |
| − | | |
| − | * '''Fan settings'''
| |
| − | <p>Scroll Down to Q-Fan Configuration, press Enter<br>
| |
| − | Scroll Down to AIO Pump Control and select PWM Control<br>
| |
| − | Connect Enclosure Fans (2x Noctua NF-A9 PWM)<br>
| |
| − | Scroll up to Qfan Tuning<br>
| |
| − | Press enter to tune fan control and wait for it to complete</p>
| |
| − | | |
| − | * '''Boot device settings'''
| |
| − | <p>Go across Boot tab<br>
| |
| − | Ensure that Boot Option #1 is the Samsung 960 EVO 250GB</p>
| |
| − | | |
| − | * '''Boot Configuration'''
| |
| − | <p>Select boot configuration option:<br>
| |
| − | Set ''Wait for F1 on Error'' to disabled<br>
| |
| − | </p>
| |
| − | | |
| − | * '''Save settings and exit'''
| |
| − | <p>Press F10 and Enter to Save UEFI BIOS settings and reboot</p>
| |
