Difference between revisions of "Reconfigure VPN"

From DFN Wiki
Jump to: navigation, search
(Initial version of DFNEXT new VPN setup instructions)
 
(add openvpn reconfig instructions for KITs and SMALLs)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
== DFNEXT systems ==
 
== DFNEXT systems ==
  
Instructions for 099 in this case, replace with other number for other camera systems:
+
These instructions are for system DFNEXT099, please replace with a corresponding number for your camera system.
  
 
=== Login to the camera system... ===  
 
=== Login to the camera system... ===  
Line 17: Line 17:
 
   rm -rf DFNEXT099.conf DFNEXT099.tgz keys
 
   rm -rf DFNEXT099.conf DFNEXT099.tgz keys
  
=== Transfer the DFNEXT099.zip file to /etc/openvpn on the camera (scp/winscp/sftp/rsync or so) ===
+
=== Transfer the DFNEXT099.zip file provided by the DFN team to /etc/openvpn on the camera (scp/winscp/sftp/rsync or so) ===
  
 
=== Unzip the configuration, password protected for security reasons ===
 
=== Unzip the configuration, password protected for security reasons ===
 +
 +
''Note: the password (hint) will arrive in a separate e-mail message, not with the VPN config file.''
  
 
   cd /etc/openvpn
 
   cd /etc/openvpn
Line 68: Line 70:
 
   3 packets transmitted, 3 received, 0% packet loss, time 2002ms
 
   3 packets transmitted, 3 received, 0% packet loss, time 2002ms
 
   rtt min/avg/max/mdev = 211.841/215.206/220.417/3.755 ms
 
   rtt min/avg/max/mdev = 211.841/215.206/220.417/3.755 ms
 +
 +
== DFNKIT & DFNSMALL systems ==
 +
 +
''Note: this is an example for DFNKIT22. Replace the hostname according to the system you are working on.''
 +
 +
=== Remove the old config file and keys/certificates ===
 +
(and also the old config tarbal *.tgz)
 +
 +
  DFNKIT22 ~ # cd /etc/openvpn
 +
  DFNKIT22 openvpn # rm -rf DFNKIT22.conf DFNKIT22.tgz keys
 +
 +
''Note: If not sure what to delete, the old certs can stay and the .conf file actually gets overwritten when unwrapping the tar.gz. However, there is no use for the old keys/certificate, as that is expired.''
 +
 +
=== Then unwrap the new config into /etc/openvpn ===
 +
(still in folder /etc/openvpn)
 +
 +
  DFNKIT22 openvpn # tar -xvzf DFNKIT22.tar.gz
 +
 +
That creates new .conf and certs in keys-gfo subfolder.
 +
 +
=== Then restart the openvpn client service ===
 +
 +
  DFNKIT22 openvpn # service openvpn restart
 +
 +
=== Verify that it is running ===
 +
 +
  DFNKIT22 ~ # service openvpn status
 +
  [ ok ] VPN 'DFNKIT22' is running.
 +
 +
  DFNKIT22 openvpn #  ip a | grep tun
 +
  4: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100
 +
      inet 10.1.21.22/20 brd 10.1.31.255 scope global tun0
 +
 +
  DFNKIT22 openvpn # ping -c 3 dfn_vpn
 +
  PING dfnserver_vpn (10.1.16.1) 56(84) bytes of data.
 +
  64 bytes from dfnserver_vpn (10.1.16.1): icmp_req=1 ttl=64 time=234 ms
 +
  64 bytes from dfnserver_vpn (10.1.16.1): icmp_req=2 ttl=64 time=234 ms
 +
  64 bytes from dfnserver_vpn (10.1.16.1): icmp_req=3 ttl=64 time=233 ms
 +
 +
  --- dfnserver_vpn ping statistics ---
 +
  3 packets transmitted, 3 received, 0% packet loss, time 2003ms
 +
  rtt min/avg/max/mdev = 233.998/234.104/234.203/0.083 ms

Latest revision as of 03:20, 13 July 2023

DFNEXT systems

These instructions are for system DFNEXT099, please replace with a corresponding number for your camera system.

Login to the camera system...

...either locally using ethernet wire or WiFi or just use screen and keyboard (HDMI, screen needs to be connected before powering up the camera box).

Disable and remove the old VPN config

 cd /etc/openvpn
 systemctl stop openvpn@DFNEXT099.service
 systemctl disable openvpn@DFNEXT099.service
 systemctl mask openvpn@DFNEXT099.service
 rm -rf DFNEXT099.conf DFNEXT099.tgz keys

Transfer the DFNEXT099.zip file provided by the DFN team to /etc/openvpn on the camera (scp/winscp/sftp/rsync or so)

Unzip the configuration, password protected for security reasons

Note: the password (hint) will arrive in a separate e-mail message, not with the VPN config file.

 cd /etc/openvpn
 unzip DFNEXT099.zip

... that creates file DFNEXT099.tar.gz

Install and activate the new config - on the camera system as root connected using local IP

 root@DFNEXT099:/etc/openvpn# tar -xvzf DFNEXT099.tar.gz
 client/DFNEXT099.conf
 client/keys-gfo/
 client/keys-gfo/DFNEXT099.crt
 client/keys-gfo/ca.crt
 client/keys-gfo/ta.key
 client/keys-gfo/DFNEXT099.key
 systemctl start openvpn-client@DFNEXT099.service
 systemctl enable openvpn-client@DFNEXT099.service

Verify that it is running

 root@DFNEXT099:/etc/openvpn# systemctl status openvpn-client@DFNEXT099.service
 ● openvpn-client@DFNEXT099.service - OpenVPN tunnel for DFNEXT099
   Loaded: loaded (/lib/systemd/system/openvpn-client@.service; enabled; vendor preset: enabled)
   Active: active (running) since Sun 2023-01-29 03:11:35 MST; 2 weeks 3 days ago
   Docs: man:openvpn(8)
         https://community.openvpn.net/openvpn/wiki/Openvpn24ManPage
         https://community.openvpn.net/openvpn/wiki/HOWTO
 Main PID: 15223 (openvpn)
   Status: "Initialization Sequence Completed"
   CGroup: /system.slice/system-openvpn\x2dclient.slice/openvpn-client@DFNEXT099.service
           └─15223 /usr/sbin/openvpn --suppress-timestamps --nobind --config DFNEXT099.conf
 root@DFNEXT099:/etc/openvpn# ip a | grep tun
 15: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 100
    inet 10.1.23.99/20 brd 10.1.31.255 scope global tun0
 root@DFNEXT099:/etc/openvpn# ping -c 3 dfn_vpn
 PING dfnserver_vpn (10.1.16.1) 56(84) bytes of data.
 64 bytes from dfnserver_vpn (10.1.16.1): icmp_seq=1 ttl=64 time=213 ms
 64 bytes from dfnserver_vpn (10.1.16.1): icmp_seq=2 ttl=64 time=211 ms
 64 bytes from dfnserver_vpn (10.1.16.1): icmp_seq=3 ttl=64 time=220 ms
 
 --- dfnserver_vpn ping statistics ---
 3 packets transmitted, 3 received, 0% packet loss, time 2002ms
 rtt min/avg/max/mdev = 211.841/215.206/220.417/3.755 ms

DFNKIT & DFNSMALL systems

Note: this is an example for DFNKIT22. Replace the hostname according to the system you are working on.

Remove the old config file and keys/certificates

(and also the old config tarbal *.tgz)

 DFNKIT22 ~ # cd /etc/openvpn
 DFNKIT22 openvpn # rm -rf DFNKIT22.conf DFNKIT22.tgz keys

Note: If not sure what to delete, the old certs can stay and the .conf file actually gets overwritten when unwrapping the tar.gz. However, there is no use for the old keys/certificate, as that is expired.

Then unwrap the new config into /etc/openvpn

(still in folder /etc/openvpn)

 DFNKIT22 openvpn # tar -xvzf DFNKIT22.tar.gz

That creates new .conf and certs in keys-gfo subfolder.

Then restart the openvpn client service

 DFNKIT22 openvpn # service openvpn restart

Verify that it is running

 DFNKIT22 ~ # service openvpn status
 [ ok ] VPN 'DFNKIT22' is running.
 DFNKIT22 openvpn #  ip a | grep tun
 4: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100
     inet 10.1.21.22/20 brd 10.1.31.255 scope global tun0
 DFNKIT22 openvpn # ping -c 3 dfn_vpn
 PING dfnserver_vpn (10.1.16.1) 56(84) bytes of data.
 64 bytes from dfnserver_vpn (10.1.16.1): icmp_req=1 ttl=64 time=234 ms
 64 bytes from dfnserver_vpn (10.1.16.1): icmp_req=2 ttl=64 time=234 ms
 64 bytes from dfnserver_vpn (10.1.16.1): icmp_req=3 ttl=64 time=233 ms
 --- dfnserver_vpn ping statistics ---
 3 packets transmitted, 3 received, 0% packet loss, time 2003ms
 rtt min/avg/max/mdev = 233.998/234.104/234.203/0.083 ms