RS&BOOM

Raspberry Shake

Setup and display of data

Plug Ethernet cable into Raspberry Shake and connect other end with Ethernet jack in wall or Wifi router

Plug the unit in and power it on (blue LED should light up)

Open browser on desktop computer (or tablet, phone) and navigate to http://rs.local (if this does not work, find IP address of raspberry shake (for Windows 10 cmd: arp –a) and type in your browser http://???.?.??.???)

Raspberry Shake can be configured by choosing Settings icon

Default username and password: username: myshake, password: shakeme

Helicorder plot (last 12h of data, updates every 2 min) can be seen on http://rs.local/heli

Program ‘swarm’ (available on Linux, MAC, Windows) can be downloaded on webpage to visualize seismic data from Raspberry Shake (http://rs.local >> Actions icon (green icon on bottom) >> Downloads >> Swarm), for Windows: open swarm_console.bat, Linux+MAC: sh swarm.sh

Data from Raspberry shake is in folder myShake – Networks – AM, RS Community folder shows data from raspberry shake community

Click into helicorder plot (shows last 24h of data in 30 min segments) to see detailed waveform data, first right click: power spectra, second right click: spectrogram

Shut down from web front-end, never just pull plug (system >> shutdown)

Note: If there are more than one Raspberry Shake on same network, they will appear as rs.local, rs-2.local, …, rs-n.local.

Working Raspberry Shake lights ensemble:

Pi board (red (solid), green (flashing every 2-5 s)

Shake board (blue (solid))

Ethernet port (green (flashing repeatedly), orange (solid))

More detailed information:

https://manual.raspberryshake.org/quickstart.html

https://manual.raspberryshake.org/traces.html

for offline application: https://manual.raspberryshake.org/no-network.html

Data download

open rs.local >> Actions icon >> DOWNLOADS >> DATA, opens FTP connection for individual file download

/opt/data/archive/2020/AM/R640E/EHZ.D

Labels

AM.R640E.00 – Shake 1D + Boom

AM.RABE8.00 – Shake 1D + Boom

AM.RC24D.00 – Shake 1D + Boom

AM.RBB35.00 – 3D Shake

Notes

Note: 3Ds will need aligning to true North

Useful terminal commands

ls –lh: check if it records

date: to check UTC date

rsh: shut down

ip n: shows ip addresses

ssh myshake@172.16.1.136 (if this does not work try ssh myshake@rs.local)