Difference between pages "Camera Maintenance" and "Hayabusa"

From DFN Wiki
(Difference between pages)
Jump to: navigation, search
m (add timeozne config link)
 
(EM)
 
Line 1: Line 1:
=== General User Interface via the web ===
+
Instructions for instruments operated during the Hayabusa-2 observation campaign.
When servicing cameras, the [[Using the GUI for Regular Maintenance|GUI]] is your first port of call. It can be used to
 
  
* [[Using the GUI for Regular Maintenance#Check hard drive storage space|Check hard drive storage space]]
+
= Infrasound =
* [[Using the GUI for Regular Maintenance#Check GPS status|Check GPS status]]
 
* [[Using the GUI for Regular Maintenance#Format HDDs|Format HDDs]]
 
* [[Using the GUI for Regular Maintenance#Run interval control test|Run testing software]]
 
  
For full instructions on it's use, see [[Using the GUI for Regular Maintenance]].
+
== [[RPi infrasound logger|Raspberry Pi (bare) logger]] ==
  
=== Physical HW maintenance ===
+
== [[Blackbox infrasound logger|Blackbox logger]] ==
You will also occasionally be required to:
 
  
* [[How to install flanged Samyang lens and DSLR to the DFNEXT enclosure|Installing lens and DSLR]] in the [[Observatory_Types|DFNEXT]] observatory type
+
== [[RS&BOOM|Raspberry Boom]] ==
* [[Fitting the outer blower ducting]] on a [[DFNEXT]] or [[DFNSMALL]] observatory
 
* Physically replace [[Replacing the Hard Drives|the hard drives]]
 
* Clean the Lenses and [[Applying Hydrophobic Lens Coating]]
 
* [[DSLR_Settings|Nikon DSLR settings]]
 
* [[Focusing the DSLR]]
 
* [[Formatting the CF Card|Format the CF Card]]
 
* [[Manual_Maintenance#Replacing_embedded_PC_board|Replacing the embedded PC]]
 
  
This is recommended [[Camera_Maintenance_Toolkit|minimal toolkit]]. This is a [[Camera_servicing_kit|comprehensive servicing]] kit we use on field trips in Australia.
 
  
=== [[Manual Maintenance]] using commandline (Todo: move this link and recategorise content within) ===
 
If you are ever required to perform any manual maintenance, use the following links for information on the following topics, or see the general [[Manual Maintenance]] page.
 
  
* [[Manual Maintenance#Installing new HDDs|Replace the Hard Drives]]
+
= Seismic =
* [[Manual Maintenance#Software Updates|Update Software]], [[Update Software|Update Software Page 2]] Todo: fix duplication here
 
* [[Manual Maintenance#Direct connection|Connecting to the PC with a keyboard and monitor]]
 
* [[Finding network interface MAC address]]
 
* [[Manual_Maintenance#Configure_timeozne|Configure the local time zone]]
 
  
=== Advanced Usage ===
+
== [[RS&BOOM|Raspberry Shake]] ==
  
* [[Microcontroller Commands]]
 
  
* [[Observatory_Types|Which camera type do I have?]]
 
  
==== DFNSMALLs ====
+
= Optical (imaging) =
  
* [[DFNSMALL observatories BIOS configuration]] - including jumpers - for Commell LE-37D PC
 
  
==== DFNSKITs ====
 
  
* [[DFNSMALL observatories BIOS configuration|DFNKIT embedded PC BIOS configuration]] - including jumpers - for Commell LE-37D PC
+
= Optical (spectroscopy) =
  
==== DFNEXTs ====
 
  
* [[DFNEXT onservatories BIOS configuration]] - including jumpers - for Commell LE-37G PC
+
= EM =
  
==== FireOPALs ====
+
* [[log-periodic antenna|log-periodic antenna]]
 
 
* [[FireOPAL observatories specific configurations]] (6-core Mini ITX PC BIOS)
 

Revision as of 09:44, 3 November 2020

Instructions for instruments operated during the Hayabusa-2 observation campaign.

Infrasound

Raspberry Pi (bare) logger

Blackbox logger

Raspberry Boom

Seismic

Raspberry Shake

Optical (imaging)

Optical (spectroscopy)

EM