Difference between pages "Standalone Fireball Camera Installation" and "Hayabusa"

From DFN Wiki
(Difference between pages)
Jump to: navigation, search
(Fuses and Fuse Holders)
(Tag: visualeditor)
 
(EM)
 
Line 1: Line 1:
<gallery mode="packed" heights="350">
+
Instructions for instruments operated during the Hayabusa-2 observation campaign.
File:DaysHill_camera_1200.JPG|
 
File:Weekeroo.jpg|
 
File:Nilpena_camera_1200.JPG|
 
File:Moolawatana_camera_1200.JPG|
 
File:Sm_DSC_2024.JPG|
 
File:Ingomar_camera_1200.JPG|
 
File:BillaKalina_camera_1200.JPG|
 
</gallery>
 
  
== Observatory Stand Assembly ==
+
= Infrasound =
At least two people are recommended for assembling the stand.
 
  
# Place stand base on four blocks or bricks ensuring there is clearance for the rib and back's tabs.
+
== [[RPi infrasound logger|Raspberry Pi (bare) logger]] ==
# Place stand back on top of base and insert tabs.
 
# Lean stand back outwards and insert stand rib. You may have to wiggle the pieces until they fall into place.
 
# Start inserting wedges staring from the corners. Do the top first and then start on the bottom corners. It may be helpful to tilt the stand over a bit or lay it down on its side.
 
# Once the wedges are are all securely inserted, wire up the four fencing wire cross stays and tension by twisting using a large screwdriver.
 
# Align stand so stand back is facing south (in the Southern Hemisphere, north in the Northern Hemisphere).
 
# Stake down the stand in soft soil or weigh down the stand using rocks or sandbags. As the centre of mass is not over the centre in the base, it is not safe to leave the stand without weight or stakes.
 
  
= Solar Panel Stand Assembly =
+
== [[Blackbox infrasound logger|Blackbox logger]] ==
  
# Assemble solar panel stand using aluminium angle bar, wedges, panels and self tapping fasteners (Tek Screws).
+
== [[RS&BOOM|Raspberry Boom]] ==
# Add sand shoes in soft soil
 
# Stake or weigh down solar panel stand.
 
  
= Power System =
 
Components:
 
  
* Enclosure
 
  
* Deep cycle battery
+
= Seismic =
* Solar charge controller
 
* Solar panel(s)
 
* Fuses and fuse holders for load and battery if not provided by solar charge controller
 
* Cable glands or panel mount connectors for solar panel wiring
 
* DFN observatory power connector
 
* Wire for connections
 
  
=== Enclosure ===
+
== [[RS&BOOM|Raspberry Shake]] ==
The B&R Forte FR060430 has been used for all previous solar powered DFN observatory installations (unless there is an existing power supply). It is available from electrical wholesalers (e.g. [http://advanced.net.au/ Advanced Electrical Equipment], [http://electricaldistributors.com.au/ Electrical Distributors], [https://www.mmem.com.au/ MM Electrical Merchandising]) or at a higher price from [https://au.rs-online.com/web/p/wall-boxes/8852711 RS Components].
 
  
=== Deep Cycle Battery ===
 
The recommended battery for the DFN fireball observatories is a 140-180 AH deep cycle lead acid battery. This is the same sort of battery you would use to run a fridge in an RV or boat. AGM (absorbant glass mat) or gel constructions are fine. The DFN uses 165 or 175 AH AGM deep cycle batteries. Ensure that the battery will fit inside the Forte FR060430 with the solar charge controller. (Usable internal dimensions are a bit less than 600x400x300 mm.)
 
  
Good suppliers include:
 
  
* [http://www.independantbattery.com.au/ Independent Battery Distributors],
+
= Optical (imaging) =
* [https://www.batteryworld.com.au/ Battery World], and
 
* [https://www.aussiebatteries.com.au/ Aussie Batteries & Solar].
 
  
It is worth ordering in bulk and obtaining multiple quotes to secure a good price. Lead acid batteries will degrade if not kept charged, so it is worth charging any batteries you have in storage about every six months.
 
  
When used in a solar power application it is best to keep the [[wikipedia:Depth_of_discharge|depth of discharge]] of lead acid batteries to 30% or less to prolong the cycle life of the battery.
 
  
=== Solar Charge Controller ===
+
= Optical (spectroscopy) =
A [[wikipedia:Maximum_power_point_tracking|maximum power point tracking]] charge controller will allow you to use much better value 200-360W 60 or 72 cell solar panels designed for rooftop use and available as low as $0.50 per Watt instead of 12V 65-150W solar panels designed for camping which are much more expensive (around $2 per Watt).
 
  
The [https://www.victronenergy.com/solar-charge-controllers/mppt7510 Victron Energy BlueSolar MPPT 75/15] would be a good option that seems like good value at [https://www.outbackmarine.com.au/blue-solar-mppt-75-15-charge-controller-victron-sc around $130]. You will also need a [https://www.victronenergy.com/panel-systems-remote-monitoring/ve-direct-bluetooth-smart-dongle Bluetooth smart dongle] or [https://www.victronenergy.com/accessories/ve-direct-to-usb-interface USB cable] to program the battery charging voltages on the charge controller (about [https://www.outbackmarine.com.au/victron-ve.direct-bluetooth-smart-dongle~21407 $90] or [https://www.outbackmarine.com.au/victron-ve.direct-to-usb-interface $50] respectively).
 
  
The DFN has used the [https://www.morningstarcorp.com/wp-content/uploads/2014/02/SS3.IOM_.Operators_Manual.01.EN_.pdf SunSaver SS-20L-12V] with three 80-100W panels for most of its installs, but this configuration is no longer recommended due to the high cost of 12V panels compared to 60 or 72 cell panels.
+
= EM =
  
=== Solar Panel(s) ===
+
* [[log-periodic antenna|log-periodic antenna]]
A single polycrystalline panel of at least 275W is recommended. We would recommend considering the [https://www.jinkosolar.com/ftp/EN-Eagle+-275PP(Plus)-60_rev2015.pdf Jinko Solar JKM275PP-60] which is very good value at [https://sgwholesale.solar/ $0.46/W]. We have used the Jinko Solar JKM270PP-60 to power all of our off-grid FireOpal SSA observatories.
 
 
 
=== Fuses and Fuse Holders ===
 
The power system should be protected by two [https://www.altronics.com.au/p/s5910a-25a-clear-blade-fuse/ 25A] or [https://www.altronics.com.au/p/s5912a-30a-green-blade-fuse/ 30A] automotive blade fuses placed in line with the battery and load (observatory) using [https://www.altronics.com.au/p/s6036-30a-in-line-blade-fuse-holder/ blade fuse holders] (unless protection is provided by the solar charge controller—as is the case with the [https://www.victronenergy.com/solar-charge-controllers/mppt7510 Victron Energy BlueSolar MPPT 75/15]).
 
 
 
Amphenol MS3102A 14S-2P
 
 
 
*
 
 
 
== Setting up: ==
 
 
 
[[DFNEXT Assembly]]
 
 
 
=== orientation ===
 
On the Southern hemisphere, the solar panels shall face North, while the observatory box doors shall face south. On the Northern hemisphere it is obviously the other way around.
 
 
 
<pic of whic way should be north>
 
 
 
=== heat shield ===
 
north or south hemisphere
 
 
 
=== gps ===
 
cables and connections
 
 
 
=== wifi, 3G, ethernet ===
 
blah
 
 
 
== Example DFN design ==
 
System as used by DFN below. you can do other designs, the important criteria for a power system is it must provide <XX> Amp-hours per day, reliably:
 
 
 
=== stand assembly ===
 
<pic>
 
 
 
=== panels ===
 
<pic>
 
 
 
=== battery box and cabling ===
 
<pic>
 
 
 
__NOTOC__
 

Revision as of 09:44, 3 November 2020

Instructions for instruments operated during the Hayabusa-2 observation campaign.

Infrasound

Raspberry Pi (bare) logger

Blackbox logger

Raspberry Boom

Seismic

Raspberry Shake

Optical (imaging)

Optical (spectroscopy)

EM