Difference between revisions of "Formatting the CF Card"

From DFN Wiki
Jump to: navigation, search
m (1 revision imported)
 
m (1 revision imported)
(No difference)

Revision as of 17:54, 23 August 2018

In the case of an error with the CF card in the DSLR the remedy is to format the card. Formatting is also necessary when the CF card is replaced.

During the day time, when it the DSLR is off, power it on with this command: python /opt/dfn-software/enable_camera.py or through the GUI interface.

D810 card error display.
D810 format needed (solid).
In order to format the card, the USB cable needs to be disconnected from the DSLR. The card can be formatted through the screen menu or with the formatting buttons, in most DFN systems it is easier to use the buttons.
D810 formatting buttons (Red) and USB cable (Blue).

Press and hold the two formatting buttons until the screen indicates ready to format and then release and immediately press both buttons again to format.

D810 ready to format.
D810 format in process (flashing).

Power off the camera with: python /opt/dfn-software/disable_camera.py or through the GUI Interface