Difference between revisions of "DFNSMALL observatories BIOS configuration - Advantech"

From DFN Wiki
Jump to: navigation, search
(add new page - Advantech PC MIO-5250 BIOS configuration)
 
m (correct BIOS instructions)
 
Line 17: Line 17:
 
1) Advanced -> PPM configuration: CPU C-state report: Disabled  
 
1) Advanced -> PPM configuration: CPU C-state report: Disabled  
  
2) South bridge: Restore AC power loss: Power ON
+
2) Advanced -> ACPI settings -> Resume on RTC alarm: Enable, 8:00 (UTC)
  
3) Advanced -> ACPI settings -> Resume on RTC alarm: Enable, 8:00 (UTC)
+
3) Advanced -> IDE: AHCI mode
  
4) Advanced -> IDE: AHCI mode
+
4) Chipset -> South bridge: Restore AC power loss: Power ON

Latest revision as of 06:51, 30 May 2022

Advantech MIO 5250 single board industrial PC

This is the PC with a large black heatsink.

BIOS update

You will need: PC (Advantech), VGA monitor, keyboard, mains power supply, USB stick containing FreeDOS, patching utility and BIOS binary.

BIOS Version V1.13 to be installed. The BIOS binary image is in the mercurial repo (dfn_repo/doc/resources/HW/PC/Advantech/MIO-5250/BIOS).

Steps:

- Execute BIOS patching (Advantech: BIOS built-in patching function, BIOS image ion USB stick)

- Verify that the BIOS version changed to V1.13 CPU C-state report: Disabled (after loading BIOS defaults)

BIOS configuration

1) Advanced -> PPM configuration: CPU C-state report: Disabled

2) Advanced -> ACPI settings -> Resume on RTC alarm: Enable, 8:00 (UTC)

3) Advanced -> IDE: AHCI mode

4) Chipset -> South bridge: Restore AC power loss: Power ON