DFNSMALL observatories BIOS configuration

From DFN Wiki
Revision as of 23:34, 23 December 2018 by Martin Cupak (talk | contribs) (Created page with "'''Valid for Commell LE-37E PC only!''' === Standard HW jumpers setup - LE-37D === In case of mSATA system SSD disk used - HW jumper JMSATA - must be in position 1-2 (default...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Valid for Commell LE-37E PC only!

Standard HW jumpers setup - LE-37D

In case of mSATA system SSD disk used - HW jumper JMSATA - must be in position 1-2 (default is 2-3) - cannot be used simultaneously with CFAST slotj

BIOS - LE-37D

1. PC behaviour after power resume BIOS -> Others-> Super IO Configuration -> PowerLoss -> Power control [Always ON]

2. SATA BIOS -> Advanced -> South cluster configuration -> SATA Drives- select AHCI mode

3. USB3 There is one USB3 port and 5 USB2 ports, by default USB3 port is extended power only, but USB2 protocol/link speed To enable USB3: BIOS -> Advanced -> South cluster configuration -> USB - disable EHCI nmode, enable xHCI mode

4. SIM card slot - only for use with mPCIe 3G modem BIOS -> Advanced -> South cluster configuration -> Miscelaneous - WLAN card presence - UHPAM card inserted -> ENABLE

5. RTC alarmevery day wake up Others -> APM Configuration ... Enabled, Everyday, 08:00 (HW clock is in UTC)

6. Save and exit 

Exit -> Exit Saving changes
Retrieved from ‘https://wiki.dfn.net.au/index.php?title=DFNSMALL_observatories_BIOS_configuration&oldid=419’