Difference between revisions of "DFNSMALL observatories BIOS configuration"

From DFN Wiki
Jump to: navigation, search
(Standard HW jumpers setup - LE-37D)
Line 2: Line 2:
  
 
=== Standard HW jumpers setup - LE-37D ===
 
=== Standard HW jumpers setup - LE-37D ===
In case of mSATA system SSD disk used<br>
+
In case of mSATA system SSD disk used - typically DFNKIT cameras<br>
 
- HW jumper JMSATA - must be in position 1-2 (default is 2-3)
 
- HW jumper JMSATA - must be in position 1-2 (default is 2-3)
  

Revision as of 23:40, 23 December 2018

Valid for Commell LE-37D PC only!

Standard HW jumpers setup - LE-37D

In case of mSATA system SSD disk used - typically DFNKIT cameras
- HW jumper JMSATA - must be in position 1-2 (default is 2-3)

BIOS - LE-37D

1. PC behaviour after power resume

BIOS -> Others-> Super IO Configuration -> PowerLoss -> Power control [Always ON]

2. SATA

BIOS -> Advanced -> South cluster configuration -> SATA Drives - select AHCI mode 

3. USB3
There is one USB3 port and 5 USB2 ports, by default USB3 port is extended power only, but USB2 protocol/link speed. To enable USB3:

BIOS -> Advanced -> South cluster configuration -> USB - disable EHCI nmode, enable xHCI mode

4. SIM card slot - only for use with mPCIe 3G modem

BIOS -> Advanced -> South cluster configuration -> Miscelaneous	- WLAN card presence - UHPAM card inserted -> ENABLE

5. RTC alarmevery day wake up

BIOS -> Others -> APM Configuration ... Enabled, Everyday, 08:00 (HW clock is in UTC)

6. Save and exit

Exit -> Exit Saving changes