Difference between revisions of "DFNSMALL observatories BIOS configuration"
Martin Cupak (talk | contribs) (Created page with "'''Valid for Commell LE-37E PC only!''' === Standard HW jumpers setup - LE-37D === In case of mSATA system SSD disk used - HW jumper JMSATA - must be in position 1-2 (default...") |
Martin Cupak (talk | contribs) |
||
| Line 2: | Line 2: | ||
=== Standard HW jumpers setup - LE-37D === | === Standard HW jumpers setup - LE-37D === | ||
| − | In case of mSATA system SSD disk used | + | In case of mSATA system SSD disk used<br> |
- HW jumper JMSATA - must be in position 1-2 (default is 2-3) | - HW jumper JMSATA - must be in position 1-2 (default is 2-3) | ||
| − | |||
=== BIOS - LE-37D === | === BIOS - LE-37D === | ||
1. PC behaviour after power resume | 1. PC behaviour after power resume | ||
| − | BIOS -> Others-> Super IO Configuration -> PowerLoss -> Power control [Always ON] | + | BIOS -> Others-> Super IO Configuration -> PowerLoss -> Power control [Always ON] |
2. SATA | 2. SATA | ||
| − | BIOS -> Advanced -> South cluster configuration -> SATA Drives- select AHCI mode | + | BIOS -> Advanced -> South cluster configuration -> SATA Drives- select AHCI mode |
| − | 3. USB3 | + | 3. USB3 <br> |
| − | There is one USB3 port and 5 USB2 ports, by default USB3 port is extended power only, but USB2 protocol/link speed | + | There is one USB3 port and 5 USB2 ports, by default USB3 port is extended power only, but USB2 protocol/link speed. |
To enable USB3: | To enable USB3: | ||
| − | BIOS -> Advanced -> South cluster configuration -> USB - disable EHCI nmode, enable xHCI mode | + | BIOS -> Advanced -> South cluster configuration -> USB - disable EHCI nmode, enable xHCI mode |
4. SIM card slot - only for use with mPCIe 3G modem | 4. SIM card slot - only for use with mPCIe 3G modem | ||
| − | BIOS -> Advanced -> South cluster configuration -> Miscelaneous - WLAN card presence - UHPAM card inserted -> ENABLE | + | BIOS -> Advanced -> South cluster configuration -> Miscelaneous - WLAN card presence - UHPAM card inserted -> ENABLE |
5. RTC alarmevery day wake up | 5. RTC alarmevery day wake up | ||
| − | Others -> APM Configuration ... Enabled, Everyday, 08:00 (HW clock is in UTC) | + | BIOS -> Others -> APM Configuration ... Enabled, Everyday, 08:00 (HW clock is in UTC) |
6. Save and exit | 6. Save and exit | ||
Exit -> Exit Saving changes | Exit -> Exit Saving changes | ||
Revision as of 23:35, 23 December 2018
Valid for Commell LE-37E PC only!
Standard HW jumpers setup - LE-37D
In case of mSATA system SSD disk used
- HW jumper JMSATA - must be in position 1-2 (default is 2-3)
BIOS - LE-37D
1. PC behaviour after power resume
BIOS -> Others-> Super IO Configuration -> PowerLoss -> Power control [Always ON]
2. SATA
BIOS -> Advanced -> South cluster configuration -> SATA Drives- select AHCI mode
3. USB3
There is one USB3 port and 5 USB2 ports, by default USB3 port is extended power only, but USB2 protocol/link speed.
To enable USB3:
BIOS -> Advanced -> South cluster configuration -> USB - disable EHCI nmode, enable xHCI mode
4. SIM card slot - only for use with mPCIe 3G modem
BIOS -> Advanced -> South cluster configuration -> Miscelaneous - WLAN card presence - UHPAM card inserted -> ENABLE
5. RTC alarmevery day wake up
BIOS -> Others -> APM Configuration ... Enabled, Everyday, 08:00 (HW clock is in UTC)
6. Save and exit
Exit -> Exit Saving changes
