Difference between revisions of "DFNEXT temporary station"

From DFN Wiki
Jump to: navigation, search
(Created page with " Things needed: * DFNEXT * DSLR * Lens * WiFi antenna * Modem + SIM * GPS+GSM antenna * higher gain GSM antenna, if required * battery * power cable: ring terminals -> Ampheno...")
 
(using L-bracket weighted down by battery)
 
(6 intermediate revisions by the same user not shown)
Line 7: Line 7:
 
* Modem + SIM
 
* Modem + SIM
 
* GPS+GSM antenna
 
* GPS+GSM antenna
 +
* 1 hard drive (6TB): do not put more than 1 as this will drain the battery faster
 
* higher gain GSM antenna, if required
 
* higher gain GSM antenna, if required
 
* battery
 
* battery
 
* power cable: ring terminals -> Amphenol
 
* power cable: ring terminals -> Amphenol
* camera stand
+
* camera stand (2 types, see below)
  
  
Line 21: Line 22:
  
 
= Special forced video recording =
 
= Special forced video recording =
* Martin C's script, parameters...
 
* crontab modification
 
  
 +
* [[Freeture_forced_frame_save|Forced Freeture recording]]
 +
 +
= Tips =
 +
* Follow [[Camera_Maintenance|instructions]] for setup.
 +
* Important: do not move or touch the stand or camera box once the night has started: Astrometric calibration images for both video and still are going to be recorded in the early part of the night when the moon is not up.
 +
* Close the box and use WiFi or VPN to check on the camera instead of LAN cable once setup.
 +
 +
 +
= Camera stand options =
 +
 +
== using L-bracket weighted down by battery ==
 +
 +
A short ring-terminals -> Amphenol  cable can be used for this setup (save long cables for other setups).
 +
 +
[[File:L_bracket_temporary_stand_assembly.jpg|400px]]
 +
 +
[[File:L_bracket_temporary_stand.jpg|400px]]
 +
 +
== using Fireball imaging stand ==
 +
 +
* Place battery and shovel gravel/rocks on  the foot of the stand.
 +
* Use ratchet straps to tension the stand (or fencing wire, the usual method).
 +
 +
[[File:DSD_2872_1200_Gabyon_camera_from_back.jpg|400px]]
 +
 +
== using FireOpal imaging stand ==
 +
 +
Place battery and shovel gravel/rocks on  the foot of the stand.
  
Important: do not move or touch the stand or camera box once the night has started:
+
need picture...
Astrometric calibration images for both video and still are going to be recorded in the early part of the night when the moon is not up.
 
Use WiFi to check on the camera.
 

Latest revision as of 12:51, 12 November 2020

Things needed:

  • DFNEXT
  • DSLR
  • Lens
  • WiFi antenna
  • Modem + SIM
  • GPS+GSM antenna
  • 1 hard drive (6TB): do not put more than 1 as this will drain the battery faster
  • higher gain GSM antenna, if required
  • battery
  • power cable: ring terminals -> Amphenol
  • camera stand (2 types, see below)



Special staggered still triggering mode

  • Martin T's script, parameters...
  • crontab modification


Special forced video recording

Tips

  • Follow instructions for setup.
  • Important: do not move or touch the stand or camera box once the night has started: Astrometric calibration images for both video and still are going to be recorded in the early part of the night when the moon is not up.
  • Close the box and use WiFi or VPN to check on the camera instead of LAN cable once setup.


Camera stand options

using L-bracket weighted down by battery

A short ring-terminals -> Amphenol cable can be used for this setup (save long cables for other setups).

L bracket temporary stand assembly.jpg

L bracket temporary stand.jpg

using Fireball imaging stand

  • Place battery and shovel gravel/rocks on the foot of the stand.
  • Use ratchet straps to tension the stand (or fencing wire, the usual method).

DSD 2872 1200 Gabyon camera from back.jpg

using FireOpal imaging stand

Place battery and shovel gravel/rocks on the foot of the stand.

need picture...