Difference between revisions of "DFNEXT temporary station"

From DFN Wiki
Jump to: navigation, search
(using Fireball imaging stand)
(using Fireball imaging stand)
Line 44: Line 44:
 
== using Fireball imaging stand ==
 
== using Fireball imaging stand ==
  
Place battery and shovel gravel/rocks on  the foot of the stand.
+
* Place battery and shovel gravel/rocks on  the foot of the stand.
 +
* Use ratchet straps to tension the stand (or fencing wire, the usual method).
  
 
[[File:DSD_2872_1200_Gabyon_camera_from_back.jpg|400px]]
 
[[File:DSD_2872_1200_Gabyon_camera_from_back.jpg|400px]]

Revision as of 12:50, 12 November 2020

Things needed:

  • DFNEXT
  • DSLR
  • Lens
  • WiFi antenna
  • Modem + SIM
  • GPS+GSM antenna
  • 1 hard drive (6TB): do not put more than 1 as this will drain the battery faster
  • higher gain GSM antenna, if required
  • battery
  • power cable: ring terminals -> Amphenol
  • camera stand (2 types, see below)



Special staggered still triggering mode

  • Martin T's script, parameters...
  • crontab modification


Special forced video recording

Tips

  • Follow instructions for setup.
  • Important: do not move or touch the stand or camera box once the night has started: Astrometric calibration images for both video and still are going to be recorded in the early part of the night when the moon is not up.
  • Close the box and use WiFi or VPN to check on the camera instead of LAN cable once setup.


Camera stand options

using L-bracket weighted down by battery

A small ring-terminals -> Amphenol cable can be used for this setup.

L bracket temporary stand assembly.jpg

L bracket temporary stand.jpg


using Fireball imaging stand

  • Place battery and shovel gravel/rocks on the foot of the stand.
  • Use ratchet straps to tension the stand (or fencing wire, the usual method).

DSD 2872 1200 Gabyon camera from back.jpg

using FireOpal imaging stand

Place battery and shovel gravel/rocks on the foot of the stand.

need picture...