Calibrating the camera orientation

From DFN Wiki
Revision as of 17:11, 6 September 2019 by Martin Cupak (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Note: this page is a stub and needs to be extended.

As part of the initial setup, you must calibrate the camera, so that is knows which direction is north, zenith. This is important for the triangulations, as the camera must convert coordinates of pixel events into altitude, azimuth, and then into Right Ascension, Declination

If you deploy the camera as detailed in the standalone section, with the long axis of the camera east/west, and the correct direction north (camera stand towards North, camera enclosure door towards South), then the default values are OK, and you don't need to do anything.

Using the GUI

N/A yet

Command line

please don't