Calibrating the camera orientation

From DFN Wiki
Revision as of 17:54, 23 August 2018 by Robert Howie (talk | contribs) (1 revision imported)
Jump to: navigation, search

as part of the initial setup, you must calibrate the camera, so that is knows which direction is north, zenith. This is important for the triangulations, as the camera must convert coordinates of pixel events into altitude, azimuth, and then into Right Ascension, Declination

If you deploy the camera as detailed in the standalone section, with the long axis of the camera east/west, and the correct direction north, then the default values are OK, and you don't need to do anything.

Using the GUI

blah

Command line

please don't