Accessing data

Introduction

There are several options how to access data recorded by the DFN observarory systems.

Easiest, especially when the intention is to archive the data on some media anyway, is to buy same or similar drives that are in the DFN camera system, visit the camera site and replace the drive(s) with data with empty ones.

Note: we recommend NAS grade low power / low RPM drives for a better reliability compared to desktop grade drives and to minimize power consumption; we use WD RED drives.

It is useful to identify and sort the data files on the removable drives that are selected for archiving remotely before visiting the site.

It is also possible to connect eg USB drive and move data on-site. However, that may take many hours, or even days, depending on the transfer speed. Therefore it is not practical for remote locations with limited time allocated for each visit on site.

Once drives are collected, it is fairly easy to attach them to whatever PC or MAC. They are standard 3.5" SATA drives, which should be readable in most SATA/USB, SATA/FireWire or SATA/Thunderbolt enclosures/adapters, providing they address the drive(s) same way as if attached to a regular SATA port inside a PC box rather than using some proprietary format of storing data. One example an incompatible device is WD My Book USB drive (various models), sold with the HDDs. In general, better chance for compatibility is with enclosures which are sold without HDDs. We have great experience with enclosures offered by [OWC [1]], who ship world-wide. As a less expensive option with acceptable quality we can recommend [Orico[2]] enclosures.

Ext4 filesystem is used for all the drives in DFN observatory systems. There are 3rd party filesystem drivers for both MS Windows and Mac OS, while in Linux or *BSD ext4 is natively supported. Some of the drivers may support only read-only access.

TODO: add links to drivers

General steps for accessing removable drives in DFN observatory box:

Note: valid both for remote and on-site access.

1. power on removable drives in DFN camera

2. mount all or specific drives

3. inspect/manipulate/download/delete data (including eg moving from SSD buffer partition /data1 to removable(s))

4. umount all previously mounted drives

5. power off removable drives

Please refer to links below regarding detailed instructions.

All the operations can be executed from commandline https://wiki.dfn.net.au/index.php/Manual_Maintenance, some of that can be done also using web GUI https://wiki.dfn.net.au/index.php/Using_the_GUI_for_Regular_Maintenance.

Other related howtos:

Downloading Fireball Images from your observatory