Difference between revisions of "DFNSMALL observatories BIOS configuration - Advantech"
Martin Cupak (talk | contribs) (add new page - Advantech PC MIO-5250 BIOS configuration) |
Martin Cupak (talk | contribs) m (correct BIOS instructions) |
||
| Line 17: | Line 17: | ||
1) Advanced -> PPM configuration: CPU C-state report: Disabled | 1) Advanced -> PPM configuration: CPU C-state report: Disabled | ||
| − | 2) | + | 2) Advanced -> ACPI settings -> Resume on RTC alarm: Enable, 8:00 (UTC) |
| − | 3) Advanced -> | + | 3) Advanced -> IDE: AHCI mode |
| − | 4) | + | 4) Chipset -> South bridge: Restore AC power loss: Power ON |
Latest revision as of 06:51, 30 May 2022
Advantech MIO 5250 single board industrial PC
This is the PC with a large black heatsink.
BIOS update
You will need: PC (Advantech), VGA monitor, keyboard, mains power supply, USB stick containing FreeDOS, patching utility and BIOS binary.
BIOS Version V1.13 to be installed. The BIOS binary image is in the mercurial repo (dfn_repo/doc/resources/HW/PC/Advantech/MIO-5250/BIOS).
Steps:
- Execute BIOS patching (Advantech: BIOS built-in patching function, BIOS image ion USB stick)
- Verify that the BIOS version changed to V1.13 CPU C-state report: Disabled (after loading BIOS defaults)
BIOS configuration
1) Advanced -> PPM configuration: CPU C-state report: Disabled
2) Advanced -> ACPI settings -> Resume on RTC alarm: Enable, 8:00 (UTC)
3) Advanced -> IDE: AHCI mode
4) Chipset -> South bridge: Restore AC power loss: Power ON
