Difference between revisions of "DFNEXT temporary station"
| Line 11: | Line 11: | ||
* battery | * battery | ||
* power cable: ring terminals -> Amphenol | * power cable: ring terminals -> Amphenol | ||
| − | * camera stand | + | * camera stand (2 types, see below) |
| Line 29: | Line 29: | ||
* Important: do not move or touch the stand or camera box once the night has started: Astrometric calibration images for both video and still are going to be recorded in the early part of the night when the moon is not up. | * Important: do not move or touch the stand or camera box once the night has started: Astrometric calibration images for both video and still are going to be recorded in the early part of the night when the moon is not up. | ||
* Close the box and use WiFi or VPN to check on the camera instead of LAN cable once setup. | * Close the box and use WiFi or VPN to check on the camera instead of LAN cable once setup. | ||
| + | |||
| + | |||
| + | = Camera stand options = | ||
| + | |||
| + | == L-bracket weighted by battery == | ||
| + | |||
| + | |||
| + | == Fireball or FireOpal imaging stand == | ||
Revision as of 12:39, 12 November 2020
Things needed:
- DFNEXT
- DSLR
- Lens
- WiFi antenna
- Modem + SIM
- GPS+GSM antenna
- 1 hard drive (6TB): do not put more than 1 as this will drain the battery faster
- higher gain GSM antenna, if required
- battery
- power cable: ring terminals -> Amphenol
- camera stand (2 types, see below)
Contents
Special staggered still triggering mode
- Martin T's script, parameters...
- crontab modification
Special forced video recording
Tips
- Follow instructions for setup.
- Important: do not move or touch the stand or camera box once the night has started: Astrometric calibration images for both video and still are going to be recorded in the early part of the night when the moon is not up.
- Close the box and use WiFi or VPN to check on the camera instead of LAN cable once setup.
