Difference between revisions of "DFNSMALL observatories BIOS configuration"

Revision as of 23:38, 23 December 2018

Valid for Commell LE-37D PC only!

In case of mSATA system SSD disk used
- HW jumper JMSATA - must be in position 1-2 (default is 2-3)

1. PC behaviour after power resume

BIOS -> Others-> Super IO Configuration -> PowerLoss -> Power control [Always ON]

2. SATA

BIOS -> Advanced -> South cluster configuration -> SATA Drives - select AHCI mode

3. USB3
There is one USB3 port and 5 USB2 ports, by default USB3 port is extended power only, but USB2 protocol/link speed. To enable USB3:

BIOS -> Advanced -> South cluster configuration -> USB - disable EHCI nmode, enable xHCI mode

4. SIM card slot - only for use with mPCIe 3G modem

BIOS -> Advanced -> South cluster configuration -> Miscelaneous	- WLAN card presence - UHPAM card inserted -> ENABLE

5. RTC alarmevery day wake up

BIOS -> Others -> APM Configuration ... Enabled, Everyday, 08:00 (HW clock is in UTC)

6. Save and exit

Exit -> Exit Saving changes

Revision as of 23:37, 23 December 2018 (view source) Martin Cupak (talk \| contribs) (→‎BIOS - LE-37D) (Tag: visualeditor) ← Older edit		Revision as of 23:38, 23 December 2018 (view source) Martin Cupak (talk \| contribs) Newer edit →
Line 1:		Line 1:
−	'''Valid for Commell LE-~~37E~~ PC only!'''	+	'''Valid for Commell LE-37D PC only!'''

	=== Standard HW jumpers setup - LE-37D ===		=== Standard HW jumpers setup - LE-37D ===