Difference between revisions of "Formatting the CF Card"
Robert Howie (talk | contribs) m (1 revision imported) |
Martin Cupak (talk | contribs) m |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
In the case of an error with the CF card in the DSLR the remedy is to format the card. Formatting is also necessary when the CF card is replaced. | In the case of an error with the CF card in the DSLR the remedy is to format the card. Formatting is also necessary when the CF card is replaced. | ||
| − | During the day time, when it the DSLR is off, power it on with this command: <code>python /opt/dfn-software/enable_camera.py</code> or through the GUI interface. | + | During the day time, when it the DSLR is off, power it on with this command: <code>python /opt/dfn-software/enable_camera.py</code> or through the [[Web_Interface|GUI]] interface. |
[[File:D810 Card Error.jpg|none|thumb|D810 card error display.]] | [[File:D810 Card Error.jpg|none|thumb|D810 card error display.]] | ||
[[File:D810 Need Format.jpg|none|thumb|D810 format needed (solid).]] | [[File:D810 Need Format.jpg|none|thumb|D810 format needed (solid).]] | ||
Latest revision as of 12:07, 2 November 2018
In the case of an error with the CF card in the DSLR the remedy is to format the card. Formatting is also necessary when the CF card is replaced.
During the day time, when it the DSLR is off, power it on with this command: python /opt/dfn-software/enable_camera.py or through the GUI interface.
Press and hold the two formatting buttons until the screen indicates ready to format and then release and immediately press both buttons again to format.
Power off the camera with: python /opt/dfn-software/disable_camera.py or through the GUI Interface
