View source for DFNSMALL observatories BIOS configuration

'''Valid for Commell LE-37D PC only!'''

=== Standard HW jumpers setup - LE-37D, DFNKIT cameras ===
In case of mSATA system SSD disk (mini card) used<br>
- HW jumper JMSATA - must be in position 1-2 (default is 2-3)

=== BIOS - LE-37D, both DFNSMALL and DFNKIT cameras ===

1. PC behaviour after power resume
 BIOS -> Others-> Super IO Configuration -> PowerLoss -> Power control [Always ON]

2. SATA
 BIOS -> Advanced -> South cluster configuration -> SATA Drives - select AHCI mode 

3. USB3 <br>
There is one USB3 port and 5 USB2 ports, by default USB3 port is extended power only, but USB2 protocol/link speed.
To enable USB3:
 BIOS -> Advanced -> South cluster configuration -> USB - disable EHCI nmode, enable xHCI mode

4. SIM card slot - only for use with mPCIe 3G modem
 BIOS -> Advanced -> South cluster configuration -> Miscelaneous	- WLAN card presence - UHPAM card inserted -> ENABLE

5. RTC alarm every day wake up (for case of accidentally suspended/hibernated)
 BIOS -> Others -> APM Configuration ... Enabled, Everyday, 08:00 (HW clock is in UTC)

6. Save and exit
 Exit -> Exit Saving changes